SKU: 39930074031

Rotwild R.E735 Core Modell 2025 Ausstellungsrad

Sale price$2159.55 Regular price$2399.50
Save 10%

Pay in installments of $599.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Rotwild R.E735 Core Modell 2025 AusstellungsradDas Rad hat auf der linken Seite im Bereich des "R. E" Schriftzuges einen leichten, dnnen Kratzer. Reduziert auf das Wesentliche ist die Antwort einfach: Das R. E735 ist sehr agil. Gleichzeitig bleibst du im Sattel im Lead. Denn das Handling des Bikes ist zu 100 % Enduro. Mageblich hierfr ist das progressive Fahrwerk und das Mullet Konzept. Mit dem 29 Laufrad vorne schreckst du vor dicken Wurzeln, groben Steinen oder verblockten Passagen nicht zurck.

Das Rad hat auf der linken Seite im Bereich des "R.E" Schriftzuges einen leichten, dünnen Kratzer. 

Reduziert auf das Wesentliche ist die Antwort einfach: Das R.E735 ist sehr agil. Gleichzeitig bleibst du im Sattel im Lead. Denn das Handling des Bikes ist zu 100 % Enduro. Maßgeblich hierfür ist das progressive Fahrwerk und das Mullet-Konzept. Mit dem 29“ Laufrad vorne schreckst du vor dicken Wurzeln, groben Steinen oder verblockten Passagen nicht zurück. Denn das Vorderrad gibt dir Stabilität. Den Gegenpart übernimmt das kleinere Laufrad (27,5“) hinten. Es ist verspielt und gibt dir eine Menge Grip. Weil es auch ein wenig dicker ist. Eine kürzere Kettenstrebe komplettiert die Konstruktion des Hinterbaus. Die dort ankommende Kraft überträgt das eigens entworfene Linkage nahtlos auf den Dämpfer. Der flache Lenkwinkel von 64,5° gibt dir Sicherheit bei hohen Geschwindigkeiten.

Der Rahmen des R.E735 ist aus Vollcarbon - aus über 1.000 einzelnen Zuschnitten aus Hochmodulfaser. Stabil und leicht. Profitiere von den großen Kraftreserven der Integrated Power Unit (IPU) 735. Mit einem Akku, der effektiv 720 Wattstunden leistet. Entnehme diesen mittels des von ROTWILD entwickelte Quick Release schnell und sicher aus dem Unterrohr. Die schräge Entnahme zur Seite sorgt für hohe Steifigkeit des Rahmens. Das Motorenherz des R.E735 schlägt in Form des Shimano EP801. Dieser unterstützt dich mit einem Drehmoment von bis zu 85 Nm. Signifikantes Zeichen für deine Ausstattungsvariante Ultra ist die Fox 36 Gabel in Kashima-Legierung und 170 mm Federweg. Alles ist auf leichtes Gewicht getrimmt. So wiegt das Ultra in Größe L 21,6kg.

Überblick

  • Rahmen: Vollcarbon aus High Modulus Carbonfasern, handgefertigt
  • Federgabel: 170 mm Federweg / 110x15 mm / 44 mm Achsversatz
  • Dämpfer: 148 mm Federweg / 210x55 mm / 21,84 mm (Buchse vorne), 19,05 mm (Buchse hinten)
  • Reifendurchmesser vorne: max. 29x2.4 (755x65)
  • Reifendurchmesser hinten: max. 27,5x2.6 (720x65)
  • Zulässiges Gesamtgewicht: ASTM 4 / 130 kg
  • Motor: Shimano EP801 / 2 Fahrprofile / 3 Unterstützungsstufen / bis zu 85 Nm Drehmoment
  • Batterie: IPU 735 / effektive 720 Wattstunden / Carbon / 4,5 A Ladegerät
  • Farbe: volcano grey metallic
  • Größen: S / M / L / XL

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 39930074031

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 19 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Craigdog
Dallas, US
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
S
Verified Purchase
Shopper
Omaha, US
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great. This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over. It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement. It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way. Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
O
Verified Purchase
Odin M Turner
Fort Morgan, US
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great  Why did you pick this product vs others?: Fair price for the amount of coverage, good quality  Works well: Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
B
Verified Purchase
BRIAN HEATH
Natrona Heights, US
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
T
Verified Purchase
TimtheK
Fort Morgan, US
★★★★★ 5
Great product - Add foam product for complete solution
Model: 36 SqFt(3.4 SqM)
Used in two cars with speaker upgrades. Easy to install but get the roller for assured adhesion.removes "tinnyness" from large metal resonators. Use with foam absorptive material for a complete system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026

recommand products