SKU: 11082659557

Totem Tribe Duo Passive Soundbar

Sale price$1125.00 Regular price$1250.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Totem Tribe Duo Passive SoundbarTotem Tribe Duo Passive Stereo Soundbar at Vinyl Sound Toronto Canada The Totem Tribe Duo is a passive 2 channel stereo architectural soundbar from Totem Acoustic (Montreal, Canada), available at Vinyl Sound in Toronto, Canada. A single 57 inch wide, 3. 54 inch deep sealed enclosure houses two complete full range speaker systems, covering a combined frequency response of 65 Hz to 25 kHz at 90 dB sensitivity and 8 ohms nominal impedance. The driver

Totem Tribe Duo Passive Stereo Soundbar at Vinyl Sound Toronto Canada

The Totem Tribe Duo is a passive 2-channel stereo architectural soundbar from Totem Acoustic (Montreal, Canada), available at Vinyl Sound in Toronto, Canada. A single 57-inch-wide, 3.54-inch-deep sealed enclosure houses two complete full-range speaker systems, covering a combined frequency response of 65 Hz to 25 kHz at 90 dB sensitivity and 8 ohms nominal impedance. The driver array comprises four 4-inch neodymium long-throw woofers and two 0.86-inch laser-etched soft dome tweeters, with a hard-wired non-PCB crossover using WBT silver solder. The Tribe Duo handles 20 to 120 watts from any stereo amplifier or AV receiver, mounts flush on the wall via the included bracket, and rests on isolation feet for furniture placement below or beside a television screen 65 inches and larger.

Passive Design, Sealed Cabinet, and Outboard Amplifier Advantage

The Tribe Duo occupies the design space that most consumers fill with an active powered soundbar, but does so as a passive speaker that routes amplification to an outboard component of the owner's choice. This passive approach enables a level of acoustic performance that powered soundbars with integrated Class D amplification and DSP processing cannot achieve at any price point, because the external amplifier operates without the thermal constraints, power supply compromises, and cabinet volume limitations imposed by fitting amplification inside a slim soundbar enclosure. The Tribe Duo's sealed cabinet provides a tight, controlled bass character distinct from the ported tuning of the Tribe Trio, rolling off the low end more gradually below 65 Hz and making it the preferred choice for music-first listening environments where accurate bass reproduction is more important than maximum extension. Totem's hard-wired crossover, assembled point-to-point on fiberboard substrate with mechanically crimped connections and WBT silver solder, eliminates the phase inconsistencies and conductive track resistance that PCB-based crossover construction introduces.

Four Neodymium Woofers, Laser-Etched Soft Dome Tweeters, and Tribe System Compatibility

The Tribe Duo's four 4-inch neodymium-activated long-throw woofers develop bass with the speed and articulation that neodymium magnet activation enables, providing a higher magnetic flux density relative to driver mass than conventional ferrite magnet structures. Each of the two channels receives two dedicated woofers and one 0.86-inch laser-etched soft dome tweeter, the same laser-surface-geometry tweeter technology found across the Tribe Series for controlled dispersion and smooth high-frequency extension to 25 kHz. Whether mounted horizontally below the television on its flush wall bracket or placed on furniture using the included isolation feet, the Tribe Duo projects the wide soundstage and vibrant harmonic character that distinguishes all Totem Solution Bars from conventional active soundbars. It combines harmoniously with the Tribe Solution Sub for 2.1 bass extension and with the Tribe III or Tribe V on-wall speakers for expanded multichannel configurations.

Key Features

  • 2-Channel Stereo Passive Design: Two full-range speaker systems in a single 57-inch-wide enclosure replace a pair of bookshelf speakers with a visually discreet architectural solution that delivers genuine stereo separation and imaging.
  • Four 4-Inch Neodymium Long-Throw Woofers: Neodymium-activated woofers with extended throw for fast, articulate bass to 65 Hz, delivering more magnetic flux per driver mass than conventional ferrite designs.
  • Two 0.86-Inch Laser-Etched Soft Dome Tweeters: Laser-surface-geometry dome drivers for controlled high-frequency dispersion and smooth treble extension to 25 kHz with consistent on and off-axis response.
  • Sealed Cabinet for Music Accuracy: Sealed enclosure provides tight, controlled bass rolloff below 65 Hz, preferred for music-first applications where bass accuracy and integration with a subwoofer are priorities.
  • Hard-Wired WBT Silver-Solder Crossover, No PCBs: Non-PCB point-to-point crossover construction eliminates conductive track resistance and phase inconsistencies for transparent, low-distortion signal transfer.
  • Passive Outboard Amplifier Advantage: Compatible with any stereo amplifier or AV receiver at 20 to 120 watts per channel at 8 ohms, enabling amplifier selection and upgrade independently of the speaker system.
  • 57-Inch Width for 65-Inch Screens and Larger: Proportioned to complement 65-inch and larger television displays with a visually harmonious installation below or beside the screen.
  • Flush Wall-Mount Bracket and Isolation Feet Included: Complete installation hardware for wall and furniture placement in one package.
  • Tribe Series Ecosystem Compatibility: Integrates with the Tribe Solution Sub for 2.1 bass extension and with Tribe III or Tribe V on-wall speakers for multichannel expansion.
  • Satin Black or Satin White with Magnetic Grilles: Matching finish options and magnetic grille attachment for clean, hardware-free front baffle aesthetics.

Technical Specifications

Design Passive 2-Channel Stereo Sealed Soundbar, On-Wall or Tabletop
Woofers 4 x 4 inch Neodymium Long-Throw
Tweeters 2 x 0.86 inch Laser Etched Soft Dome
Frequency Response 65 Hz to 25 kHz, plus or minus 3 dB
Sensitivity 90 dB
Impedance 8 Ohm
Recommended Power 20 to 120W
Crossover Hard-Wired, WBT Silver Solder, Non-PCB
Enclosure Sealed
Dimensions (W x H x D) 57 x 6.18 x 3.54 inches / 144.8 x 15.7 x 9 cm
Weight 23.8 lb / 10.8 kg
Finishes Satin Black, Satin White
Origin Engineered by Totem Acoustic, Montreal, Canada

Frequently Asked Questions

What is the Totem Tribe Duo passive soundbar?

The Totem Tribe Duo is a passive 2-channel stereo architectural soundbar from Totem Acoustic, Montreal, Canada. A single 57-inch-wide, 3.54-inch-deep sealed enclosure houses two full-range speaker systems with four 4-inch neodymium long-throw woofers and two 0.86-inch laser-etched soft dome tweeters, covering 65 Hz to 25 kHz at 90 dB sensitivity and 8 ohms. It requires an external stereo amplifier rated at 20 to 120 watts per channel and includes a flush wall-mount bracket and isolation feet for furniture placement below or beside a 65-inch or larger television.

How does the Totem Tribe Duo compare to the Sonos Arc or Samsung HW-S800D soundbar?

The Totem Tribe Duo is a passive architectural speaker rather than an active powered soundbar, which creates a fundamental performance and use-case difference from the Sonos Arc and Samsung HW-S800D. The Sonos Arc is a Wi-Fi multiroom soundbar with Dolby Atmos simulation and built-in streaming, suited to users who prioritize convenience and ecosystem integration. The Samsung HW-S800D is a compact powered bar with virtual spatial audio processing. The Tribe Duo connects to any external stereo amplifier for dramatically superior amplifier quality, eliminates all DSP processing from the signal chain, and provides genuine stereo channel separation with Totem's audiophile-grade neodymium woofers and laser-etched soft dome tweeters. For listeners who already own a quality stereo amplifier or AV receiver, the Tribe Duo converts that investment into a visually discreet architectural speaker system with performance that no active soundbar at this dimension and price point replicates.

What is the difference between the Tribe Duo and the Tribe Trio?

The Tribe Duo is a 2-channel stereo design in a sealed cabinet suited to pure stereo music listening, gaming, and TV audio without a dedicated centre channel. The Tribe Trio is a 3-channel LCR design in a ported cabinet suited to home theater installations requiring discrete left, centre, and right channel separation for dialogue, music, and cinematic surround sound. Both measure the same 57 inches wide and 3.54 inches deep and are proportioned for 65-inch and larger screens, but the Tribe Trio's additional centre channel and ported tuning give it deeper bass extension to 55 Hz compared to the Tribe Duo's 65 Hz sealed rolloff.

Does the Totem Tribe Duo need a subwoofer?

The Tribe Duo's sealed cabinet reaches 65 Hz, which covers music, television dialogue, and casual gaming content adequately in smaller rooms. For cinematic home theater use with LFE bass content or for music genres that extend meaningfully below 65 Hz, adding the Tribe Solution Sub with its dual 8-inch woofers and 500-watt Class D amplifier provides full-range bass extension to 26 Hz. The Tribe Solution Sub's variable crossover from 40 to 120 Hz allows a precise integration point with the Tribe Duo's sealed rolloff for seamless acoustic blending.

Can the Totem Tribe Duo be used with a streaming amplifier or AV receiver?

Yes, the Tribe Duo connects to any stereo amplifier, AV receiver, or streaming integrated amplifier rated at 20 to 120 watts per channel at 8 ohms. Streaming integrated amplifiers with built-in Bluetooth, AirPlay 2, or Chromecast from NAD, Bluesound, or Cambridge Audio pair naturally with the Tribe Duo for a complete wireless streaming and speaker system without additional components. For TV integration, any AV receiver with HDMI ARC or optical input drives the Tribe Duo's two channels from the television's audio output.

Where can I buy the Totem Tribe Duo soundbar in Toronto or Canada?

The Totem Tribe Duo Passive Stereo Soundbar is available at Vinyl Sound, an authorized Totem Acoustic dealer in Toronto, Canada. Vinyl Sound carries the full Tribe Solution Bar lineup including the Tribe Duo, Tribe Trio, and Tribe Solution Sub, and can advise on amplifier pairing, system configuration, and Canada-wide delivery. Purchasing from an authorized Canadian dealer ensures full manufacturer warranty support and access to Totem Acoustic's Canadian service network.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 11082659557

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 875 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
KevMeist
Carnegie, US
★★★★★ 5
Excellent device, see my use case in the review.
Color: Grey
I got the hub in two days ago. I plugged it in to a uni-directional HDMI cable (I have used these for years from Monoprice.com) from the hub to the TV and the PD port into the charging block. Charging started but the iPad Pro screen was NOT showing on the TV. I switched in a regular HDMI cable from the hub to the TV and it worked. The Monoprice cables have some sort of logic in the cable ends allowing a very thin HDMI cable. I have used these on my TVs at home and when teaching at a senior facility for at least 8 years now. So, something with the unidirectional HDMI cables seems to interfere with this hub but “regular” HDMI cables seem OK. Before buying this hub, I had emailed Anker TS with a question. Anker turned around 3 emails with answers in just over an hour. This is one of the reasons why I have bought quite a lot of Anker products over the years. My use for this is to plug in my iPad Pro to my AVR so that I can stream stuff to my TV while simultaneously charging the iPad at the same time. This works well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 16, 2025
C
Verified Purchase
C. Rypkema
Draper, US
★★★★★ 5
Works great and handles everything.
Color: Black
Works great. I plug in a standalone video camera for meetings, a keyboard & trackball, and monitor with a couple of other slots open, like for a portable CD-ROM/DVD player. One plug into the laptop and everything is connected. Initially, I bought another hub, but that one didn't consistently work. This one does. In a month of heavy use, I've had no issues with it at all.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
Z
Verified Purchase
Zane
Lexington, US
★★★★★ 5
Helped transfer data from Samsung Galaxy S21 with broken screen.
Color: Black
Helped me transfer data from a Samsung Galaxy S21 with broken screen. Simple put USB C end into phone , grab HDMI cable and plug into hub , then plug HDMI end into a monitor. Then grab a wireless keyboard & mouse and plug dongle into hub. Your phone will output to monitor and you can transfer data via Smart Switch using keyboard & mouse. Will only work if phone is unlocked I found on S21.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
B
Verified Purchase
B. Johnson
Draper, US
★★★★★ 5
good so far!
Color: Black
Seems to work fine so far. The last one - different brand - had a bad connection and Im hopefully as I do always find Anker to be of good quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
S
Verified Purchase
Stacey B
Whiting, US
★★★★★ 5
Great Slim iPad Case – Secure Fit & Easy to Use
Color: Black, Size: ipad 9th/ 8th/ 7th gen 10.2 inch, Color: Black, Size: ipad 9th/ 8th/ 7th gen 10.2 inch
This is a really nice iPad case and worked perfectly as a replacement for my old one that was falling apart. I have an Apple iPad 9th Generation (10.2 inch), and this case fit perfectly. The cutouts for the camera, volume buttons, power button, and charging port all line up exactly as they should. The iPad snaps into the case easily by gently pressing it into the rounded corners, and once installed it feels very secure with no slipping or falling out. The case is very lightweight also. I also had no issues accessing or using any of the buttons while the case was on. One of my favorite features is the automatic sleep/wake function—closing the cover puts the iPad into sleep mode, which helps save battery life. I chose the black version, and it has a clean, simple look. For the price, I think it’s a great value. Overall, this is a slim, functional, and well-fitting iPad case that I definitely recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026

recommand products