Hiblow HP-150 Pond Aerator

Hiblow HP-150 Pond AeratorKey Features Specs Warranty Documentation The Hiblow HP 150 will effectively and efficiently aerate ponds of up to two acres in size and up to ten feet in depth, making it the best available option by far for smaller, shallow ponds. If your Hiblow HP series pump wont turn on when first plugged in, it may have been bumped during shipping, which may have activated the safety slide switch to the position where it deactivated the electric motor. Please

• Key Features
  
• Specs
• Warranty
• Documentation

• The Hiblow HP-150 will effectively and efficiently aerate ponds of up to two acres in size and up to ten feet in depth, making it the best available option by far for smaller, shallow ponds.

  If your Hiblow HP series pump won’t turn on when first plugged in, it may have been bumped during shipping, which may have activated the safety slide switch to the position where it deactivated the electric motor. Please refer to the owner’s manual for instructions on how to reset the safety slide switch; you can find an electronic copy of the owner’s manual on the support tab of the Hiblow website.

  All Hiblow pumps can operate on either 50hz or 60hz—do please note that the pump’s performance will vary depending on the frequency. Hiblow linear pumps are not dual voltage; please check the label for data on the correct voltage and only apply the indicate voltage to power the pump.

  Hiblow pumps will only operate on alternating current (AC) in order for the shuttle rod to achieve the correct back and forth motion, which creates the necessary pressure or vacuum for proper functioning. If you must operate a Hiblow pump from a DC source, an inverter would be required.

  For best performance and longest life, your Hiblow pump should be installed in a cool, dry location out of direct sunlight. A garage, shed, or crawlspace are all optimal options. If you must install the Hiblow pump in an outside location, be sure the pump receives sufficient ventilation—in order to achieve the maximum operating life, keep any additional heat exposure to a minimum.

• Rated Voltage	115 V
  Current	1.9 A
  Power Supply Frequency	60 Hz
  Power Consumption	155 W
  Rated Loading Pressure	2.90 psi
  Max. Operating Pressure	4.3 psi
  Noise Level	47 dBA

• • 2 Year Warranty Covering all Manufacturer Defects
  • 3 Year Warranty on Electrical Components ONLY

  
  

• Hiblow HP150 Septic Pump Documentation