Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
FSR CDA-2EQGA High Resolution 1 x 2 Distribution AmplifierThe CDA 2EQGA High Resolution 1 x 2 Distribution Amplifier from FSR is designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run. The CDA 2EQGA's local monitor output is fully buffered by an independent amplifier stage to elimate interaction with the remote output. The remote output is buffered and equalized to maintain high signal integrity with even the highest video resolutions. This means
The CDA-2EQGA High Resolution 1 x 2 Distribution Amplifier from FSR is designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run. The CDA-2EQGA's local monitor output is fully buffered by an independent amplifier stage to elimate interaction with the remote output.
The remote output is buffered and equalized to maintain high signal integrity with even the highest video resolutions. This means that the signal that you feed into the CDA-2EQGA will arrive at the far end of the cable with an almost immeasurable amount of loss. Cable runs of 175' are possible using standard mini hi-res coax cable.
The remote output sync circuitry provides a termination option switch to help overcome display jitter and image loss associated with improper sync termination. Image jitter and loss problems are infrequent, but unpredictable and frustrating issues that result from differences in VGA cable construction and display input termination.
To ensure installed system compatibility, the CDA2EQGA can obtain EDID display information data from either the local (default setting) or remote monitor by setting the internal jumpers. The CDA2EQGA model employs a green automatic power down feature that reduces standby power consumption to less than 50mW, which is a reduction of over 95%. This mode can be disabled in applications where a horizontal sync signal is not present to support this feature.
The CDA-2EQGA incorporates a mini stereo input jack on the front and a 5 position pluggable captive screw terminal on the back for balanced stereo audio output. An active audio balancing circuit ensures long, noise-free stereo audio cable runs from the point of installation to the house sound system. The CDA-2EQGA is suitable for laptop or desktop presentations such as PowerPoint that require the secondary audio and video feeds to run longer distances. It can be a versatile complement to a designer's/integrator's palette.
- Ultra high bandwidth
- Flat frequency response
- Local monitor output
- Monitors EDID data selector
- Integrated line driver with cable EQ
- Includes power supply and all mounting hardware
- Applications include conference / board rooms, classrooms, courtrooms, staging and rental, as well as houses of worship
- Made in USA
- Limited 1-Year Warranty
| Video Input | |
|---|---|
| Type | 1 RGB-HV |
| Connectors | 1 female HD-15 |
| Level | Nominal: Analog 0.7 Vpp Maximum: 2 Vpp |
| Impedance | 75 ? |
| Maximum Resolution | Up to QXGA (2048 x 1536 @ 60 Hz) |
| Video Output | |
|---|---|
| Equalizer | Video Number/Type: 1 RGB-HV Connectors: 1 female HD-15 Bandwidth: The performance data is based on the CDA-2EQGA/CDA-2EQG using FSR mini Hi-Resolution cable with a full amplitude (0.7 Vpp) signal applied. 50' cable 310 MHz (-3 dB); 0 to 200 MHz (�0.5 dB) 100' cable 225 MHz (-3 dB); 0 to 140 MHz (�0.5 dB) 150' cable 168 MHz (-3 dB); 0 to 105 MHz) �0.5 dB) EQ settings are adjustable via DIP switch Sync Input level: 2.0 to 5.0 Vpp Output level: 4.0 Vpp into Hi-Z, 2.0 Vpp into 75 ? Input Impedance: 511 ? Output impedance selectable: Lo-Z (DIP SW 2 DN) or Hi-Z (DIP SW 2 UP) Polarity: Positive or negative Horizontal frequency: 15 to 200 kHz Vertical frequency: 30 to 150 Hz |
| Local/Remote | Video Number/type: 1 RGB-HV Connectors: 1 female HD-15 Bandwidth: 300 MHz at -3 dB Gain: Unity (buffered) Impedance: 75 ? Sync Input level: 2.0 to 5.0 Vpp Output level: 4.0 Vpp into Hi-Z, 2.0 Vpp into 75 ? Input Impedance: 511 ? Output impedance: 75 ? Polarity: Positive or negative Horizontal frequency: 15 to 200 kHz Vertical frequency: 30 Hz to 150 Hz |
| Audio |
|---|
| Input | |
|---|---|
| Type | 1 x Stereo unbalanced |
| Connectors | 3.5 mm stereo plug |
| Input Impedance | 10 k? unbalanced |
| Maximum Level | With a 600 ? Load: +4 dBV balanced load -2 dBV unbalanced load With a Hi-Z Load +6 dBV balanced 0 dBV unbalanced |
| Output | |
|---|---|
| Type | 1 x balanced Stereo (May be used in unbalanced configuration) |
| Connectors | 5 position pluggable screw terminal |
| Impedance | 100 ? balanced/50 ? unbalanced |
| Gain | +6 dB balanced or unbalanced |
| Maximum Level | With a 600 ? Load: +10 dBV balanced load +4 dBV unbalanced load With a Hi-Z Load +12 dBV balanced +6 dBV unbalanced Balanced audio output performance, unless otherwise noted. |
| Power | |
|---|---|
| Requirements | 12 VDC at 200 mA |
| Stand By Power | <50 mW |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy