Low Volume Sprayer Kit with Trigger-Lock & Aprehend® Pouch

Low Volume Sprayer Kit with Trigger-Lock & Aprehend® PouchThe specially designed Aprehend spray kit provides the required 2 band with proper spray pattern when held approximately 4 from the surface being sprayed. The Trigger Lock allows the spray gun to be used with a continuous spray when the button is in the locked position, which is especially helpful when using the optional extension wand kit. The plastic reservoir holds 3 fl oz 89 mL. If any product remains after treatment, it can be poured back into

The specially-designed Aprehend® spray kit provides the required 2” band with proper spray pattern when held approximately 4” from the surface being sprayed.

The Trigger-Lock allows the spray gun to be used with a continuous spray when the button is in the locked position, which is especially helpful when using the optional extension wand kit. The plastic reservoir holds 3 fl oz/89 mL. If any product remains after treatment, it can be poured back into the original bottle—no waste!

The pouch strap adjusts from 28–59 inches (71-150cm) for use as a waist, shoulder, or crossbody pouch. 

Description

• Custom pouch with 28–59-inch expandable strap (P/N APRS202)
  
• Spray gun with 3oz reservoir (P/N APRS210)
• Compressor and A/C adaptor (P/N APRS112)
• Coiled hose (P/N APRS113)
• Rechargeable Lithium Ion battery (P/N APRS114)
• Lithium Battery Wall Charger, 12.6v 0.5A 
• Lithium Battery 12V DC Car Charger (P/N APRS116)
• Compressor A/C wall adapter (P/N APRS135)
  

Part Number: APRS201

ConidioTec Part Number: 30201

How to Use

DIRECTIONS FOR USE 

The battery comes partially charged. Turn on the battery to see the charge level. The battery must be charged in the ON position. Apply a topping charge for 2–3 hours before use. For detailed information on use and care of the battery refer to the separate instruction sheet enclosed in the battery box.

Connect the coiled air hose to the air outlet on the compressor. Wrench-tighten 1/4-turn past hand-tight. Connect the coiled air hose to the air inlet on the gun. Wrench-tighten 1/4-turn past hand-tight. Connect the battery to the compressor using the supplied connector cable. Note position of spray gun trigger lock: “ON” for use with optional extension kit or “OFF” for hand-held use. Place all items in the pouch. Apply Aprehend® according to the instructions on the label.