PULUZ Magnetic Lavalier Wireless Microphone with Charging Case Box, 8 Pin RX Receiver and 2 TX Microphones, 8 Pin 2 TX + 1 RX, with Charging Case Box

PULUZ Magnetic Lavalier Wireless Microphone with Charging Case Box, 8 Pin RX Receiver and 2 TX Microphones, 8 Pin 2 TX + 1 RX, with Charging Case BoxFeatures 1. SmartLink Solution. 2. 2. 4G wireless connection, capable of providing high fidelity recording at up to 48K. 3. Support 15ms low latency recording, with imperceptible delay. 4. Excellent noise reduction performance, allowing easy recording in noisy environments without interference from background noise. 5. High quality scene sound reproduction in original sound mode, suitable for immersive recordings. 6. Continuous recording for 5 6 hours

Features
1. SmartLink Solution.
2. 2.4G wireless connection, capable of providing high-fidelity recording at up to 48K.
3. Support 15ms low-latency recording, with imperceptible delay.
4. Excellent noise reduction performance, allowing easy recording in noisy environments without interference from background noise.
5. High-quality scene sound reproduction in original sound mode, suitable for immersive recordings.
6. Continuous recording for 5-6 hours per session.
7. Can play required audio or accompaniment via Bluetooth.
8. Charging case with light indicator to show battery levels, with a running light display from 0-100.

Specifications
1. Main material: ABS
2. Channel system: Two transmitters and one receiver
3. Control method: Button
4. 2.4G solution: Smartlink WS300
5. Working format: GFSK
6. Working frequency: 2.4G-2.4835GHz
7. Radio sensitivity: -38db+/-1db
8. Effective distance: Less than or equal to 20 meters
9. Transmitter shutdown power consumption: 5uA
10. Transmitter working power consumption: 20mA
11. Receiver working power consumption: 20mA
12. Receiver charging current for mobile phone: 1A-1.5A
13. Microphone signal-to-noise ratio: 72db
14. Microphone maximum boost level: 126db
15. Frequency response: 20Hz-20KHz
16. Monitoring: Support two-way monitoring
17. Microphone: 6027 welding wire microphone
18. Transmitter battery capacity: 130mAh
19. Recording time: 5-6 hours
20. Standby time: (power off) 6 months
21. Charging input standard: Contact charging: DC-5V/ Max 90+/-10mA
22. Charging time: 1.5 hours
23. Charging compartment battery capacity: 700mAh
24. Charging compartment Max charging current: 300mA
25. Charging compartment full charge time: About 2-3 hours
26. Charging compartment no-load standby power consumption: Less than 50uA
27. Charging compartment load standby power consumption: Less than 65uA
28. Power indicator: Digital display
29. Charging power management chip: Single-channel detection

Package List
1. Host x 1
2. Manual x 1
3. Storage bag x 1
4. Charging cable x 1
5. Color box x 1