SKU: 71738400110

BAT "Under The Crooked Claw" CD

Sale price$12.60 Regular price$14.00
Save 10%

Pay in installments of $3.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BAT "Under The Crooked Claw" CDRelease Date: May 17 2024 Our attraction to horror is visceral and undeniable. Racing pulse and sweating palms, and yet you cant turn away. Its shocking . . . yet also exhilarating. Its what keeps us coming back for more, that rush of fear. Richmond, Virginia metal punk trio BAT have been delivering their own blood spattered horror since ascending from the underground a decade ago on a dark, leather winged trajectory. The brainchild of MUNICPAL WASTE

Release Date: May 17 2024

Our attraction to horror is visceral and undeniable. Racing pulse and sweating palms, and yet you can’t turn away. It’s shocking . . . yet also exhilarating. It’s what keeps us coming back for more, that rush of fear.

Richmond, Virginia metal-punk trio BAT have been delivering their own blood-spattered horror since ascending from the underground a decade ago on a dark, leather-winged trajectory. The brainchild of MUNICPAL WASTE guitarist, Ryan Waste, BAT’s origins actually go back to 2008 when Waste and former D.R.I. drummer, and Texas native, Felix Griffin, hatched the idea of working together. “We’d see each other when I’d pass through Texas,” says Waste, “and we talked about doing a project where I played all the instruments—guitar, bass, and vocals— and he would drum. We both love Discharge and Celtic Frost and we wanted to do something real straightforward, no frills.

BAT remained a shadowy concept more than an actual band until Waste enlisted guitarist Nick Poulos from VOLTURE, the heavy metal project he’d been doing in addition to his MUNICIPAL WASTE duties. As VOLTURE ran out of steam in 2013, BAT took flight with Waste and Poulos crafting a sonic origin story that grew from the original ‘straightforward, no frills’ ethos into something rougher, darker, and laden with an approach that’s straight out of the down-and-dirty side of the New Wave of British Heavy Metal. With Nick’s soaring lead playing, Ryan returned to his distorted bass roots, all rounded out by Felix’s relentless battery.

BAT’s 2013 debut, Primitive Age EP, was recorded on analog reel-to-reel tape in Richmond at the trio’s first rehearsals with Texas-based Griffin. “That first session was just meant to be a demo tape,” says Waste. “We hardly overdubbed anything and kept it loose, as the songs were just taking form. That primitive style became the way the band rolled.” This raw demo was nonetheless issued on cassette by Tankcrimes before BAT had even played a show. BAT made their first live appearances opening three shows for SATAN (UK) in April 2014. With more touring to follow, these demo songs matured into their own after being put to the test live. They re-recorded the five demo tracks along with seven new tunes that would become their 2016 debut full-length album Wings of Chains (Hells Headbangers). They released a music video for their namesake song also known as ‘Beware of the BAT’ which featured a fully fabricated costume designed by Margaret Rolicki (GWAR) based on the album artwork by Christoph Breit (Infected Arts).

After a series of tragic personal events befell Griffin, he was forced to depart the band in 2017, with his swansong being the Axestasy EP (recorded in 2017, released in 2019). To replace Griffin, BAT tapped local drummer Chris Marshall, a vet of D-beat outfit NO TOMORROW, adding the perfect punk foil to Poulos and Waste’s speed metal riffing. “I’ve always preferred punk drumming with a single kick for our style,” says Waste. “I think his playing suits the band and Chris does it with a lot of soul.”

Once Marshall joined BAT in 2017, the three were finally able to rehearse on a regular basis since all members were living in the same town for the first time. They were now available to pick up and play gigs on demand, and ultimately made it to Europe supporting NAPALM DEATH right up until the pandemic closed the world down in 2020. Given the opportunity to woodshed uninterrupted, BAT attacked what would become album number two. “The songs came together incredibly easily and quickly, like something you’d see in a movie,” Waste explains. “We were writing together as a three-piece—with drums finally in the room—and the ideas just came flowing out. I’d go home and write lyrics immediately afterwards, the inspiration was palpable.

In June 2021, the trio decamped to Philadelphia where Arthur Rizk recorded the basic tracks for the new BAT full-length. Yavé Rust tracked lead guitars and vocals later when the band was back in Richmond, ultimately mixed by Rizk. With a newly inked deal with Nuclear Blast and a new drummer, BAT’s sophomore full-length would be a significant step forward, and Waste and Co. were determined to make an impact.

Under the Crooked Claw does just that, right from the perfect mood-setting opener, “Una Torcia Illumina Il Cielo,” courtesy of Italian horror soundtrack maestro Fabio Frizzi. The brief haunting synth piece is like a measured descent into a dank crypt where the living dead erupt with in a fury in the raging ‘Vampyre Lore.’ Eleven more tales of terror follow in rapid succession with a grisly theme throughout. “I feel like the songs could be short horror stories of their own,” notes Waste of his lyrical efforts. “The first single, ‘Rite for Exorcism,’ is basically a reverse exorcism, where the girl is accepting the demon into her and she turns it on the preacher. Evil wins in this case.”

Waste is known for his love of the NWOBHM, but with BAT, he’s taken that influence in a fresh direction on ‘Under the Crooked Claw, with its tight, concise songs loaded with punchy choruses and lightning-laced leads. “As big of a heavy metal fan as I am, I think the dirtier side of it fits better with my vocals,” he says. “But we try to push the boundaries in BAT between heavy metal, punk and rock ‘n’ roll to where you can’t quite put your finger on it. Dynamically it all coagulates together with our dirty sound. I call it primitive heavy speed. It’s just the nastiest mix of all of the above.

And as for any suggestion that BAT is a “side project” for Waste and Poulos, Waste is having none of that. “It’s not just a side project,” he states definitively. “Everything I do is full force and this no different. There’s so much more we want to do with it.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 71738400110

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
Chelsea, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Chelsea, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Phoenix, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Boise, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Charlottesville, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products