Cisco 16 GB DDR3-1866-MHz RDIMM PC3-14900/2R/x4/

Upgrade your Cisco server with high-performance, reliable memory designed for demanding workloads. This Cisco 16 GB DDR3-1866-MHz RDIMM PC3-14900/2R/x4/ module delivers faster data access, improved stability, and scalable capacity to support virtualization, database operations, and real-time analytics. Built for server environments, it combines registered memory with robust speed (1866 MHz) and a 1.50 V operating voltage to help maximize throughput while keeping power efficiency in check. Whether expanding memory in existing systems or planning for future growth, this module provides dependable performance and consistent bandwidth across memory channels.

• Premium capacity and speed: 16 GB per DIMM with DDR3-1866 MHz throughput (PC3-14900) accelerates memory-intensive applications, from large-scale databases to virtualized environments, helping reduce bottlenecks and improve response times.
• Server-grade reliability: Registered (buffered) DIMM design enhances signal integrity in multi-processor servers and helps stabilize high-density memory configurations, delivering steady performance under load and over time.
• Efficient operation: Operates at 1.50 V, which supports energy-efficient performance without sacrificing memory bandwidth, contributing to lower overall thermal output in the data center.
• Flexible memory topology: 2R (two ranks) and x4 data width optimize memory bandwidth and channel utilization, improving scalability for servers that demand consistent data access patterns and higher throughput.
• Easy upgrade and broad compatibility: Designed for Cisco server platforms that support DDR3-1866 RDIMM modules, enabling straightforward upgrades and future-proofing in enterprise environments without complex reconfiguration.

Technical Details of Cisco 16 GB DDR3-1866-MHz RDIMM PC3-14900/2R/x4/

• Capacity: 16 GB
• Type: DDR3 RDIMM (Registered) SDRAM
• Speed: 1866 MHz
• Data rate: PC3-14900
• Voltage: 1.50 V
• Memory organization: 2R (two ranks) and x4 data width
• Form Factor: DIMM
• Application: Server-grade memory module designed for Cisco server platforms

How to install Cisco 16 GB DDR3-1866-MHz RDIMM PC3-14900/2R/x4/

• Prepare the server: Shut down the system, unplug the power, and disconnect all cables. Ground yourself to prevent static discharge.
• Access the memory slots: Remove the server cover following the manufacturer’s instructions and locate the RAM slots on the motherboard or memory riser cards.
• Identify the correct slot: Ensure you are installing a DDR3-1866 RDIMM module in a supported slot that accepts 2R/x4 RDIMMs, checking the server’s hardware guide for compatibility.
• Align and insert: Orient the module so the notch on the DIMM lines up with the key in the slot. Gently but firmly press until the module is fully seated and the locking clips click into place.
• Verify installation: Reassemble any panels, reconnect power, and boot the server. Enter the BIOS/UEFI to confirm the new memory is detected and configured at 1866 MHz. Save settings and exit.

Frequently asked questions

• Q: What is the capacity of this Cisco memory module? A: 16 GB per module.
• Q: At what speed does this memory operate? A: DDR3-1866 MHz (PC3-14900).
• Q: Is this module registered? A: Yes, it is a Registered RDIMM designed for server environments.
• Q: What is the operating voltage? A: 1.50 V.
• Q: Is it compatible with Cisco servers? A: It is designed for Cisco server platforms that support DDR3-1866 RDIMM modules and similar server memory configurations.