SKU: 42161408386

Bambu Lab H2S 3D Printer Combo (includes AMS 2 Pro)

Sale price$670.50 Regular price$745.00
Save 10%

Pay in installments of $186.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Bambu Lab H2S 3D Printer Combo (includes AMS 2 Pro)Bambu Lab H2S Your Personal Manufacturing Hub Accuracy That Works for You Correct Mechanical Deviations Even the printer come out of the factory with superb accuracy, mechanical wear and variances over time are inevitablebut now, first time in the industry, theres a solution. With the Vision Encoder, the H2S achieves distance independent motion accuracy under 50 mthinner than a human hair. During calibration, it automatically compensates for

Bambu Lab H2S - Your Personal Manufacturing Hub

Accuracy That Works for You

Correct Mechanical Deviations

Even the printer come out of the factory with superb accuracy, mechanical wear and variances over time are inevitable—but now, first time in the industry, there’s a solution. With the Vision Encoder⁽¹⁾, the H2S achieves distance-independent motion accuracy under 50 μm—thinner than a human hair. During calibration, it automatically compensates for mechanical drift, ensuring consistent precision and peak performance over time.

One Print. Perfect Fit.

Bambu Lab's Auto Hole/Contour Compensation² minimizes printing tolerances, delivering machine-shop-level precision for hole dimensions. Design fit-critical parts with confidence—integrate shafts, bearings, and fasteners without trial and error. Post-print assembly has never been easier.

Ready for Engineering Filaments

Featuring a 350 °C hotend and a 65 °C actively heated chamber, it supports the entire Bambu filament lineup—from PLA and PETG to PC and PPA. With closed-loop fan control and precise thermal management, the H2S minimizes warping and deformation while improving layer adhesion. Build large, high-performance parts that are as functional as they are strong.

 

Even Surfaces, Crisp Edges

H2S uses both the sensing capability of its servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to precisely control extrusion by measuring nozzle pressure and calibrating PA parameters for each filament, improving surface smoothness and edge sharpness.

Precision in Motion

Active Vibration Compensation neutralizes micro-vibrations and resonance in real time, enabling premium print quality at higher speeds.

Intelligence That's Got Your Back

20,000 Checks Per Second. Closed-Loop Feedback, Real-Time Control.
Bambu Lab’s proprietary PMSM servo system enables 20 kHz resistance and position sampling to dynamically modulate electromagnetic torque vectors. It stabilizes extrusion and actively detects grinding⁽³⁾ or clogs in real time.

23 Sensors + 3 Cameras

Each Potential Risk Has Its Own Detector

Vision System

With AI-driven real-time monitoring, the vision system detects clumping, spaghetti and purge chute jamming as they happen, helping prevent failed prints before they start. This same vision system powers advanced features like Live Spatial Alignment, allowing precise laser and cutting calibration, and Vision Encoder technology, which enhances positional accuracy.

Feeding

Filament-path sensors work in unison to monitor feeding speed and position, detect filament tangles and grinding risks, track filament mileage and spool usage, and ensure tool readiness across the AMS, buffer, cutter, and feeding paths, making sure every tool is in place and every move is under control.

Thermal Control

Five NTC temperature sensors are strategically placed across the nozzle, heatbed, and chamber. Paired with integrated airflow sensors, the system actively monitors and adjusts internal temperatures and circulation, maintaining the ideal print environment through real-time feedback control.

Safety

The H2S features five flame sensors, front-door and top-cover sensors, and emergency stop button to form a complete safety system. It detects fire risks, monitors enclosure alignment, and allows instant shutdown when needed—protecting your projects and your workspace at all times.

Pre-Flight Checklist by AI

Prior to each operational cycle, the H2S vision system initiates a comprehensive pre-flight checklist: Chamber Integrity Scan – Detects debris across the entire print surface. Hardware Configuration Audit – Instantly identifies build plate properties.

Flap Switch Airflow & Filtration System

3D Printing & Laser Cutting. 3 Modes, All-in-One

High-Temp Printing

Chamber sealed. Internal air recirculates through the Air Filter and the heater to stabilize high-temp conditions. Print large engineering parts without warping.

Low-Temp Printing

Top Vent opens to bring in cool air, while maintaining a filtered exhaust⁽⁴⁾. Print PLA and PETG without opening the door, and handle overhangs and bridging with ease.

Bigger. Better. Faster.

Maximum Volume. Maximum Productivity.

With a build volume of 340×320×340 mm³, the H2S offers the largest print space among all Bambu Lab printers. Your Vision. Fully Realized in One Print.

Top Speed. More Reliable Than Ever.

Bambu Lab’s proprietary PMSM⁵ servo extrusion system delivers 67% more extrusion force, providing solid support to high flow⁶ printing. Paired with up to 1000 mm/s toolhead speed and up to 20,000 mm/s² acceleration, your H2S can finally go full throttle—cutting print time by 10–30%⁷—while maintaining top-tier quality.

Connectivity, By All Means. Privacy, By Design.

The H2S offers seamless cloud connectivity for convenient remote control from any device. For security-sensitive applications, it also delivers complete offline functionality, ensuring physically isolated operation. Users can control the printer, send files, and upgrade firmware—no internet required. Additionally, Developer Mode unlocks MQTT port access, empowering developers and integrators to connect third-party components and custom software with ease.¹⁰

Accessible. Comfrotable. Made to Last.

Quick-Swap Nozzle

Swap nozzles in seconds—no tools, no hassle. Whether you're switching to a high flow hotend or a different nozzle size, the redesigned hotend makes it easy and intuitive, even for first-time users.

Quiet by Design

With Active Motor Noise Canceling and specialized air duct noise-reduction technology, the H2S operates below 50 dB¹¹. Print overnight or in shared spaces without disrupting your environment.

All-Metal, Die-Cast Body

The integrated die-cast aluminium alloy chassis delivers a sturdy, stable structure that provides a rigid foundation for high-speed, large-format printing, while minimizing accuracy loss caused by micro-twisting.

Multi-Color Printing and Drying, All-in-One with AMS 2 Pro

Electro-Magnetic Air Vent

Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.

Auto-Rotate Drying

During the drying process, the filament spools rotate automatically to provide more even drying.

RFID Sync

AMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed.

Specifications

  • Printing Technology: Fused Deposition Modeling
  • Body
    • Build Volume (W*D*H): 340*320*340 mm³
    • Chassis: Aluminum and Steel
    • Outer Frame: Plastic and Glass
  • Physical Dimensions
    • Physical Dimensions: 492*514*626 mm³
    • Net Weight: 30 
  • Toolhead
    • Extruder Gear: Hardened Steel
    • Nozzle: Hardened Steel
    • Max Nozzle Temperature: 350 ℃
    • Included Nozzle Diameter: 0.4 mm
    • Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
    • Filament Cutter: Built-in
    • Filament Diameter:  1.75 mm
    • Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
  • Heatbed
    • Build Plate Material: Flexible Steel Plate
    • Included Build Plate Type: Textured PEI Plate
    • Supported Build Plate Type: Textured PEI plate, Smooth PEI Plate
    • Max Heatbed Temperature: 120 ℃
  • Speed
    • Max Speed of Toolhead: 1000 mm
    • Max Acceleration of Toolhead: 20,000 mm
    • Max Flow for Hotend (standard flow hotend): 40mm³/s (Test parameters: 250mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
  • Chamber Temperature Control
    • Active Chamber Heating: Supported
    • Max Temperature: 65 ℃
  • Air Purification
    • Pre-Filter Grade: G3
    • HEPA Filter Grade: H12
    • Activated Carbon Filter Type: Granulated Coconut Shell
    • VOC Filtration: Superior
    • Particulate Matter Filtration: Supported
  • Cooling
    • Part Cooling Fan: Closed Loop Control
    • Cooling Fan for Hotend: Closed Loop Control
    • Main Control Board Fan: Closed Loop Control
    • CHamber Exhaust Fan: Closed Loop Control
    • CHamber Heat Circulation Fan: Closed Loop Control
    • Auxiliary Part Cooling Fan: Closed Loop Control
  • Filament Supported: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS; Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS
  • Sensor
    • Live View Camera: Built-in; 1920*1080
    • Toolhead Camera: Built-in; 1600*1200
    • BirdsEye Camera¹: Built-in; 3264*2448
    • Door Sensor: Supported
    • Filament Run Out Sensor: Supported
    • Filament Tangle Sensor: Supported
    • Filament Odometry: Supported with AMS
    • Power Loss Recovery: Supported
  • Electrical Requirements
    • Voltage: 100–120 VAC / 200–240 VAC, 50/60 Hz
    • Max Power²: 2050 W@220 V / 1170 W@110 V
  • Working Temperature: 10 ℃-30 ℃
  • Electronics
    • Touchscreen: 5-inch 720*1280 Touchscreen
    • Storage: Built-in 8 GB EMMC and USB Port
    • Control Interface: Touchscreen, mobile App, PC App
    • Motion Controller: Dual-core Cortex-M4 and Single-core Cortex-M
    • Application Processor: Quad-core 1.5 GHz ARM A7
    • Neural Processing Unit: 2 TOPS
  • Software
    • Slicer: 
      • Bambu Studio
      • Supports third party slicers which export standard G-code, such as Super Slicer, PrusaSlicer, and Cura, but certain advanced features may not be supported.
    • Supported Operating System: MacOS, Windows, Linux
  • Network Control
    • Ethernet: ot Available
    • Wireless Network: Wi-Fi
    • Network Kill Switch: Not Available
    • Removable Network Module: Not Available
    • 802.1X Network Access Control: Not Available
  • Wi-Fi
    • Operating Frequency: 2412-2472 MHz (CE/FCC), 2400-2483.5 MHz (SRRC) 5150-5850 MHz
    • Wi-Fi Transmitter Power (EIRP): 
      • 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
      • 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
      • 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
      • 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
    • Wi-Fi Protocol: IEEE 802.11 a/b/g/n

¹The BirdsEye Camera comes standard with the H2S Laser Edition, or can be added via the Laser Upgrade Kit.

² To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3 minutes.

Unboxing Video

Includes

  • 1x Bambu Lab H2S Printer
  • 1x AMS 2 Pro
  • 1x Textured PEI Build Plate
  • 1x Spool Holder
  • 1x Accessory Box
  • 1x Safety Key

Browse More

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 42161408386

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jamie
Pawtucket, US
★★★★★ 5
Labs love this!!!
Style: Sport, Size: Large
Our Lab LOVES everything about this thing! Recommend getting extra durable balls as the 1 included fell apart in 1 hour. I have a very energetic Lab retriever that we have to force to stop playing ball so he does not overheat. That & the force with which you can throw this ball did not help keeping it from splitting it in 2 in less than 1 hour. This is worth the money for the extra throwing power & distance but do invest in the ULTRA strong ball for dogs like retrievers! Also, be sure to order the correct SIZE OF BALL, specific to each different size of throwing wand. My fav thing about this item is #1 the joy my dog gets from the new challenge of racing to catch longer throws, & #2 I don't have to get my hands covered in dog slobber!! He has gotten to where he can almost put it in the cup himself so I won't waste time throwing the ball again! Man, I love that dog!!! ❤️
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 1, 2023
S
Verified Purchase
Stacy H
Phoenix, US
★★★★★ 5
Must-Have for Active Dogs!
Style: Sport, Size: Large
The Chuckit Sport 26L Dog Ball Launcher has been a game-changer for my large dog! My 80-pound Labrador loves to play fetch, and this launcher makes it so much easier and more enjoyable for both of us. The 26” length gives me the leverage to throw the ball much farther than I could by hand, which really helps burn off my dog’s energy. The included large ball (3”) is the perfect size for big dogs, and I appreciate that it’s made from durable rubber, so it withstands a lot of chewing and rough play. What I really love is that the launcher is so lightweight and easy to use. I can play fetch with my dog for extended periods without my arm getting tired. The ergonomic handle also provides a comfortable grip, which is a nice touch. If you have a large, active dog, the Chuckit Sport 26L is a must-have. It’s well-made, durable, and makes fetch more fun for both you and your dog. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 3, 2024
D
Verified Purchase
DD
Lake Worth, US
★★★★★ 5
ChuckIt is AMAZING!
Style: Sport, Size: Large
I can't throw a ball to save my soul. Just got this today and lobbed a ball to the far end of my 1- acre yard. The dog loves it, and I love it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026
S
Verified Purchase
Sean
Boise, US
★★★★★ 4
I recommend using the KONG Extreme Dog Toy
Style: Sport, Size: Large
Helpful for throwing as much as my dog wants to fetch. I actually had to get a cortisone injection in my shoulder a few months after getting my dog - never had a dog with this much energy before! The Chuckit really helps. Downside: The ball that comes with it is larger than a tennis ball, so may be too much for smaller doge. I can't imagine my sister-in-law's french bulldog carrying it! Also, in our house it gets destroyed within minutes, as my dog is a strong chewer. For this situation, I recommend using the KONG Extreme Dog Toy, Black, size Large. This is shaped sort of like a snowman, which means it bounces unpredictably at times. My dog eventually chews the "head" off of this toy, but the remaining 2/3 still fits in the Chuckit (and is actually easier to throw with the "head" missing!). One caveat: the KONG is significantly heavier than the ball included with the Chuckit, so be aware of that... Also, we ordered our first Chickit in October 2015, then needed to replace it in May of 2017, as it broke. I think the plastic became brittle over that time, as we left it out in the sun & rain in Florida. Since it is cheap to replace, that's not a big deal. (We ordered three Kong toys over that same period of time!) To summarize, it's a very helpful tool to get the ball further, faster, with less strain, than without it. Knowing there are alternatives to the included ball for heavy chewers makes it worthwhile.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 19, 2017
D
Verified Purchase
DesertRoads
Fort Morgan, US
★★★★★ 5
Great Ball Launcher!
Style: Sport, Size: Large
Our dogs love this ball launcher! I can throw the ball long distances without any arm strain. The balls wear out, and as described by others, tennis balls don’t fit. Buy extra balls if this is of concern. We bought a few of the “Chuck It” rubber 3” balls and they have worked well for our dogs. It’s a great value and fun for the dogs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2025

recommand products