Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lemon RX LM0086XT60 DSMP 7ch RX Telemetry, Stabilizer & Energy MeterThe generation 2 DSMP 7 channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance. DSMX DSM2 compatible, 7 channel full range telemetry stabilizer with full telemetry features including a built in barometer, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both
The generation 2 DSMP 7-channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance.
- DSMX / DSM2 compatible, 7-channel full-range telemetry stabilizer with full telemetry features including a built-in barometer, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application
- BEC1 and BEC2 dual inputs allow high-reliability operation while improving setup for high current drain performance servo
- Built-in Delta, V-tail and Normal Wing mixer
- Supports stabilization with separated channel dual aileron operation
- Stabilization always-on feature
- Real-time variable stabilization gain control on channel 8
- All-channel failsafe
- Firmware health monitoring software stack and ultra-low operational voltage (3.6V) ensure the highest hardware reliability
- Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience
- Antenna diversity improves the reliability of the wireless link
- Satellite port for additional signal diversity
- Gyro stabilization activation with either AUX2 or Gear channel
- 3 potentiometers for individual gain tuning
User manual
Reset stabilizer
- Connect power
- Hold F and B buttons (approximately 5 secs+) until all LED flashes randomly
- Press the C button. Multiple LEDs flash a few times to complete the operation
Bind with bind plug
- Insert bind plug on Channel 7
- Connect power
Bind without bind plug
- Connect power
- Hold the B button until the red LED flashes
Bind with a satellite without a bind plug
- Connect power
- Hold the B button until the red LED flashes
- Disconnect power
- Plug the satellite wire connector into the stabilizer
- Connect power
Failsafe
- Connect power to the receiver and ensure the servos are working with the transmitter
- Press the F button for 3 seconds until green changes from off to on and vice versa to change the failsafe setting. Channel value is saved as failsafe default at the time the green LED turns on.
- Turn off the transmitter and wait 2 seconds to ensure the failsafe is activated accordingly by ensuring there is torque generated with finger-pushing the servo linkage if it was to be set. Vice versa.
Stabilization activation switch
- Disconnect power
- Insert bind plug to channel 5
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash.
- Release the C button
- Press C to make changes within 3 seconds. Green = CH7, Blue = CH5.
- Wait for 3 seconds and remove the bind plug
Wing Mode and Dual Aileron
- Disconnect power
- Insert bind plug to channel 6
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash
- Check the receiver label/user manual to understand the referred LEDs' operation
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug
- Ensure transmitter mixing is set accordingly for dual aileron if stabilized dual aileron is to be configured.
Gyro direction
- Check the receiver label/user manual to understand the referred LEDs' operation
- Connect power and wait 1 second
- Hold the C button and wait for about 1 second until the 6 LEDs flash
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug.
V/I sensor calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Turn on the DC loading device by throttling the transmitter. Ensure 4A is drawing across the V/I sensor. Be careful with the motor spinning if it is to be used.
- Press the B button to save and exit.
V/I probe calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Press the B button to save and exit.
Gain setting
- Adjust via the 3 dials or real-time master gain on channel 8 depending on the transmitter channel's availability.
View setting LEDs with all on
- Press the C button briefly (no more than 2 seconds).
Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 602 reviews
Sort
Product Reviews
★★★★★ 3
Difficult assembly, doesn’t fold well, looks good fully open
Color: Grey, Size: B-88''W-4 Panel
The instructions for this divider are very inadequate. After having to redo parts of the assembly, I have finally assembled it. The divider itself seems very nice when it is fully open, however it is not possible to fold it well as all the bars with the wheels go in various directions making it impossible to fold it neatly. And it has a large footprint. It is possible that I did not assemble it fully well because of the lack of adequate instructions. I am not even sure if I will keep it because I need to fold out of the way when nothing in use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 4
Slightly challenging build
Color: Beige, Size: A-88''W-4 Panel
This was my second screen set I've purchased, first of this style. Not the easiest to assemble. Lots of pulling and tugging; not a highlight in my day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
★★★★★ 5
Commercial grade divider suitable for many needs
Color: Beige, Size: A-132''W-6 Panel
This item will be used at a future event where we need to separate a single locker room into two large areas, without any construction. This divider is perfect for the job because the partitions can be 1 to 6 panels and it will roll into place. When the event is over, the divider will fold/roll away and the locker room will return to its original design.
The unit is very heavy, which will ensure that it is sturdy and stable. All the components arrived, wrapped in plastic to prevent damage. The screen material is a woven polyester in a cream color that will occlude any visibility but it may be possible to see shadows on the opposite side. The height is about 6ft, which would require a very tall person to "peep over" the divider.
I needed a quality unit for this project and the frame, screens, and mobility will meet the needs. The divider is not the same as the small decorative dividers -- it is more of a commercial grade product, yet tasteful. If you want/need a small divider as an accent piece, this is not the best choice. This item could be used in a medical office, treatment/massage room, to divide an office room into two, or block a hallway in a building.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 2
Flimsy
Color: Grey, Size: B-88''W-4 Panel
Would not recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
★★★★★ 5
Great option for a professional looking backdrop
Color: Black, Size: B-102''-3 Panel
I decided to try these wall dividers for my home office space since it does not have a door. I wanted to have my video calls without the rest of the room in the feed to give it a more professional feel. These being on castors make them super easy to move into position and roll off to the side when not in use. They are stable, much more than the folding screens I have tried in the past. That they are connected by the middle piece and not the top/bottom of each other allows you to adjust the positioning to your needs. Overall, this did exactly what I needed and was an affordable option. I also like that they are highly portable: if you want to take them for a booth or event, the poles all disassemble into manageable lengths that easily fit in a car and take very little time to set up again. The only thing I would change is to include a bag to store them in for transportation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 17, 2025
recommand products
Chicago Pneumatic 8941082060 CP82060 Jack Stand 6T - Pair
170.99
Lund 94-97 Dodge Ram 1500 Std. Cab Pro-Line Full Flr. Replacement Carpet - Charcoal (1 Pc.) - 3413
142.14
Lund 73-89 Dodge D100 Std. Cab Pro-Line Full Flr. Replacement Carpet - Coffee (1 Pc.) - 3308
142.14
Lund 98-06 Ford F-250 Std. Cab Pro-Line Full Flr. Replacement Carpet - Charcoal (1 Pc.) - 2713
142.14
CPS Products QCL134 R134A Manual Low Side Coupler
41.25