SKU: 93606577698

Front Shock Absorber Rubber Stop for VW Golf, Jetta IV & Polo - 102269

Sale price$35.10 Regular price$39.00
Save 10%

Pay in installments of $9.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 20 - Jul 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Front Shock Absorber Rubber Stop for VW Golf, Jetta IV & Polo - 102269Vehicle Fitment & Part Details Front shock absorber rubber stop for Volkswagen Polo (6R) 1. 0 TSI, OE 1J0412303, 53mm thickness. This bump stop cross references to several shared VAG platform numbers and fits a wide range of Golf IV, Jetta IV, Polo 6R, Polo Vivo, Beetle, Audi A3 (8L) and TT (8N) applications. Two units are required per vehicle (one per front strut). Confirm compatibility by matching the listed fitment details, OEM reference numbers,

Vehicle Fitment & Part Details

Front shock absorber rubber stop for Volkswagen Polo (6R) 1.0 TSI, OE 1J0412303, 53mm thickness. This bump stop cross-references to several shared VAG platform numbers and fits a wide range of Golf IV, Jetta IV, Polo 6R, Polo Vivo, Beetle, Audi A3 (8L) and TT (8N) applications. Two units are required per vehicle (one per front strut). Confirm compatibility by matching the listed fitment details, OEM reference numbers, and VIN/engine/chassis information where variants exist.

Key Details

SKU
102269
Component
Shock Absorber Rubber Stop
Position
Front
Primary Fitment
VW Polo (6R1, 6C1) 1.0 TSI CHZB 70kW (2009-2018)
Specs
Thickness 53mm, required quantity 2 per vehicle

Key Benefits

  • Six VAG cross-reference numbers listed for checking against the original part before ordering
  • Dimensioned to supplied 53mm thickness specification

OEM Reference Numbers

  • Audi / VW (shared VAG): 1J0412303
  • 1J0412303B
  • 1JM412303
  • 1JM412303A
  • 1H0412303B
  • 6RD412303C

Product Specifications

Specification Value
Thickness 53 mm
Fitting Position Front
Required Quantity per Vehicle 2

Vehicle Fitment

Includes 45 supplied applications covering Audi, Seat and Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering.

View Full Vehicle Fitment (45 applications)
Make Model Chassis Years Engine Power
Audi A3 / S3 8L1 1998-2004 1.8 AGN; APG 92 kW / 125 HP
Audi A3 / S3 8L1 1998-2004 1.8 T AGU; AQA; ARZ; AUM 110 kW / 150 HP
Audi A3 / S3 8L1 1998-2004 S3 quattro AMK; APY 154 kW / 210 HP
Audi A3 / S3 8L1 1998-2004 S3 quattro BAM 165 kW / 224 HP
Audi TT 8N3 1998-2007 1.8 T quattro APX; BAM; BEA 165 kW / 224 HP
Audi TT Roadster 8N9 1999-2007 1.8 T quattro APX; BAM; BEA 165 kW / 224 HP
Seat IBIZA IV 6J5, 6P1 2008-2026 1.4 BXW; CGGB 63 kW / 85 HP
Seat IBIZA IV 6J5, 6P1 2008-2026 1.6 BTS 77 kW / 105 HP
Seat IBIZA IV 6J5, 6P1 2008-2026 2.0 CEKA 85 kW / 115 HP
Volkswagen BEETLE 9C1, 1C1 2000-2012 1.8 T AGU; APH; AVC; AWU; AWV; BKF 110 kW / 150 HP
Volkswagen BEETLE 9C1, 1C1 2000-2012 2.0 AEG; APK; AQY; AVH; AZG; AZJ; BEJ; BER; BEV; BHP; CBPA 85 kW / 115 HP
Volkswagen BEETLE Convertible 1Y7 2003-2012 2.0 AZJ; BDC; BEV; BGD 85 kW / 115 HP
Volkswagen GOLF IV 1J1 1997-2007 1.6 AEH; AKL; APF 74 kW / 100 HP
Volkswagen GOLF IV 1J1 1997-2007 1.8 AGN 92 kW / 125 HP
Volkswagen GOLF IV 1J1 1997-2007 1.8 T AGU; AQA; ARZ; AUM; AWD 110 kW / 150 HP
Volkswagen GOLF IV 1J1 1997-2007 1.8 T GTI AUQ; BEK 132 kW / 180 HP
Volkswagen GOLF IV 1J1 1997-2007 1.9 SDI AGP; AQM 50 kW / 68 HP
Volkswagen GOLF IV 1J1 1997-2007 1.9 TDI AHF; ASV 81 kW / 110 HP
Volkswagen GOLF IV 1J1 1997-2007 1.9 TDI ASZ 96 kW / 130 HP
Volkswagen GOLF IV 1J1 1997-2007 2.0 APK; AQY; AZG; AZJ; BEJ; BER; BHP 85 kW / 115 HP
Volkswagen GOLF IV 1J1 1997-2007 2.3 V5 AGZ 110 kW / 150 HP
Volkswagen GOLF IV Estate 1J5 2000-2004 1.6 AEH; AKL; APF 74 kW / 101 HP
Volkswagen GOLF IV Estate 1J5 2000-2004 1.9 TDI AHF; ASV 81 kW / 110 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 1.6 AEH; AKL; APF 74 kW / 101 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 1.8 T AGU; ARX; AUM; AWD; AWW 110 kW / 150 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 1.8 T AUQ; AWP 132 kW / 180 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 1.9 TDI AHF; ASV 81 kW / 110 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 2.0 APK; AQY; AZG; AZH; AZJ; BBW 85 kW / 115 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 2.3 V5 AGZ 110 kW / 150 HP
Volkswagen JETTA IV 1J2, 9M2 1999-2006 2.3 V5 AQN 125 kW / 170 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.0 TSI CHZB 70 kW / 95 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.0 TSI CHZC 81 kW / 110 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.2 TDI CFWA 55 kW / 75 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.2 TSI CJZD 81 kW / 110 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.2 TSI 16V CJZC 66 kW / 90 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.4 6R1 CDDA; CGGB; CLPA 63 kW / 85 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.4 GTI CAVE; CTHE 132 kW / 180 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.4 TDI CUSA; CYZB 55 kW / 75 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.4 TDI CUTA; CYZA 77 kW / 105 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.6 CFNA; CLSA 77 kW / 105 HP
Volkswagen POLO III 6R1, 6C1 2009-2018 1.6 TDI CAYC; CLNA 77 kW / 105 HP
Volkswagen POLO VIVO Saloon 6S2, 6S4 2010-2019 1.4 CLPA 63 kW / 86 HP
Volkswagen POLO VIVO Saloon 6S2, 6S4 2010-2019 1.4 CLPB 55 kW / 75 HP
Volkswagen POLO VIVO Saloon 6S2, 6S4 2010-2019 1.6 CLSA 77 kW / 105 HP
Volkswagen UP! 121, 122, BL1, BL2, BL3, 123 2011-2019 1.0 CHYB 55 kW / 75 HP

Fitment Notes

  • Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
  • Two units are required per vehicle (one per front strut); this listing is sold as a single piece unless otherwise stated.
  • Thickness 53mm - this part is dimensionally different to similar bump stops in the VAG range; match thickness when cross-checking.
  • South African market filtered: Seat Ibiza IV, VW Up! and VW Golf IV Estate have been excluded from the supplied feed as non-SA variants.

Installation / Use / Maintenance Tips

  • Always replace both front bump stops at the same time to maintain balanced ride and spring travel.
  • Inspect the dust boot and strut piston rod for damage while the strut is disassembled; replace degraded parts.
  • Fit the bump stop the correct way around - the larger inner diameter typically sits against the top mount side.
  • Check the strut bearing/top mount and coil spring isolator for wear and replace if in doubt.
  • Follow the manufacturer's strut reassembly and axle torque procedure; have wheel alignment checked after any strut work.

Common Questions

Will the front shock absorber rubber stop fit my VW Polo?
This part (102269) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.

How many do I need per vehicle?
Two units are required per vehicle - one per front strut. This listing is sold as a single piece unless otherwise stated on the product page.

What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.

How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93606577698

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
riknik
Draper, US
★★★★★ 4
it's a utility screen
Color: Black, Size: 3-Panel
It's a basic, utilitarian screen. It's what I expected it to be. Assembly isn't hard, but it does require two people when stretching the fabric between the poles. I got it to use in a closet to separate the water heater from the washer/dryer, so it'll be perfect for that. Pros: it's opaque and tall (my 6'4" husband can't see over it unless he is standing against it) and I like the ability for the three pieces to stand separately of each other. Cons: it's flimsy. It wobbles and will tip over easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 9, 2022
J
Verified Purchase
Jane Gios
Natrona Heights, US
★★★★★ 5
Great for the price
The item is great bit I wish it were a bit more sturdy and it folded flat. It folds into a square so it does take up some room when it's not in use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2021
K
Verified Purchase
K. Torrance
Boise, US
★★★★★ 1
Cheap, screw holes don't line up, screen is to short, and bars take WD-40 and a mallet
This has been my worst purchase on Amazon ever. DO NOT BUY. My first issue was that bars #4 and #5 would not go together, I ended up buying WD-40 and a mallet and that kind of got them together. Now I went to but the screen on (which is almost see thought) and the screen is to short. I can't attached the bottom bar to the tall bar. The screw hole is in the wrong spot, so the screen is not secure. No amount of pulling on the screen will make it grown .25" longer. Since I can't get the bars secure the walls are not steady and fall over easily. The feet did go together very nice. I can't return them according to Amazons policy. I bought 2 sets. I'm not going to try to build the other set I have. And I can't take apart the first set, since the bars are so tightly together. Also the polls have rust on them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 10, 2023
R
Verified Purchase
Rick
Port Orchard, US
★★★★★ 3
Very Poor Built Quality
Color: Black, Size: 3-Panel
They use cheap tarp like cloth that you might find on a tent, so it is not suitable as a teleconferencing background without blur applied. The legs are flimsy and lack rubber feet, so it will scratch floors. The tubing is flimsy and very hard to move and adjust. This is only good if you are setting it up somewhere like a gym or a garage.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2025
M
Verified Purchase
Mamacita
Grantham, US
★★★★★ 5
Great separator for room.
My kids love it. It separates their half of the room.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2025

recommand products