SKU: 96546123274

e28372

Sale price$97.20 Regular price$108.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

e28372Sweet Iron De Sweet Iron bitten zijn gemaakt van staal en hebben de kenmerkende blauwe kleur, die ontstaat door het verwarmen tijdens de productie. Door contact met (lucht)vochtigheid ontwikkelt Sweet Iron een oxidatielaag die de kleur van het bit verandert naar bruingrijs. Dit oxidatieproces is een gewenst effect van de Sweet Iron bitten. Sweet Iron mondstukken zijn verkrijgbaar in twee diktes, aangegeven met een cijfer in de productnaam. De 12 mm

Sweet Iron

De Sweet Iron bitten zijn gemaakt van staal en hebben de kenmerkende blauwe kleur, die ontstaat door het verwarmen tijdens de productie. Door contact met (lucht)vochtigheid ontwikkelt Sweet Iron een oxidatielaag die de kleur van het bit verandert naar bruingrijs. Dit oxidatieproces is een gewenst effect van de Sweet Iron bitten.

Sweet Iron-mondstukken zijn verkrijgbaar in twee diktes, aangegeven met een cijfer in de productnaam. De 12 mm-variant is te vinden in ponybitten en onderlegtrensen, en biedt extra ruimte in de mond. De 16 mm-variant is onze standaarddikte en wordt gebruikt bij zowel normale bitten als onderlegtrensen, passend voor een breed scala aan paarden.

Wanneer een Sweet Iron bit tijdelijk niet wordt gebruikt, kan er zich een oranjebruine roestlaag op het mondstuk vormen. Deze kan eenvoudig worden verwijderd door het bit af te nemen met een vochtige doek. Dit heeft geen invloed op de werking van het bit.

Sweet Iron bitten zijn geschikt voor alle paarden en helpen de acceptatie van het bit te verbeteren.

Elk paard is anders, en het kiezen van het juiste bit is essentieel voor comfort, heldere communicatie en goede prestaties. Een goed passend bit voorkomt drukplekken, schuiven in de mond en knellingen bij de mondhoeken—en draagt bij aan ontspanning en vertrouwen in de aanleuning.

Heb je hulp nodig bij het kiezen van het juiste model, materiaal of maat bit voor je paard? Neem gerust contact met ons op of vul het bitadviesformulier in - we helpen je graag verder.

Pelham en Baby Pelham

De Pelham is een bit met een gecombineerde hefboomwerking, die druk uitoefent op zowel de poll (net achter de oren) als de kin. Het kan met één of twee teugels worden gebruikt. Bij gebruik van één teugel moet deze via de verbinding tussen de grote en de kleinere ring lopen, met behulp van een Pelhamriem. Hoe langer de scharen zijn, hoe groter de hefboomwerking en dus de impact op het paard. Het bit is voorzien van een ketting die goed afgesteld moet worden voor de juiste werking.

De Baby Pelham is een mildere versie van de gewone Pelham, met kortere scharen die zorgen voor een minder sterke hefboomwerking. Dit maakt het effect zachter dan bij de reguliere Pelham. Net als de gewone Pelham kan de Baby Pelham met één of twee teugels worden gebruikt, met de juiste verbinding tussen de ringen bij gebruik van één teugel.

Pelham-bitten zouden alleen moeten worden gebruikt door professionele ruiters of onder begeleiding van een trainer. Hoewel het bit effectief is wanneer het correct wordt gebruikt, kan onjuist gebruik leiden tot ongemak of schade aan het paard. Het is daarom essentieel om de werking en afstelling van het bit goed te begrijpen.

Wideport Segundo

De Wideport Segundo is een dubbelgebroken mondstuk met een bewegende tongboog. In tegenstelling tot andere modellen met een vaste boog biedt dit ontwerp enige zijdelingse flexibiliteit. De boog vermindert de druk op de tong en verdeelt die meer over de lagen, al kunnen de scherpere hoeken van de boog extra drukpunten op de tong veroorzaken.

Doordat de boog kan meebewegen, wordt het voor het paard moeilijker om op het bit te leunen of de tong over het bit te leggen. Dit bit vraagt om een precieze hand en goed inzicht in de werking ervan.

Hoewel dit niet een van onze favoriete bitten is, bieden we het wel aan omdat we begrijpen dat er uitzonderlijke combinaties zijn waarbij dit type bit wél functioneel kan zijn. Gebruik wordt uitsluitend aanbevolen door professionele ruiters met ervaring, aangezien onjuist gebruik ongemak of schade kan veroorzaken.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 96546123274

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 1627 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Patrick
Lexington, US
★★★★★ 5
Overdo is what I do
Size: 13"-32", Style: Single
Since my 50" monitor is under the 22lb weight limit, I decided to give this arm a shot. Nobody seems to make an arm for something as big as a 50-inch even if they don't actually weigh that much. So what happened? The arm CAN support that weight and size. The manufacturer did a great job on the materials and it assembles very easily. For a regular monitor, this arm should work great. But the clamp design is not exactly sturdy enough for my bigger screen that exceeds the intended use. Clamped to the table top alone, the pole had a serious and unsafe lean to it. I ended up reinforcing my table with three layers of plywood secured with lag bolts right through the table top. Between the layers of plywood is the table top and a steel beam that the table top sits on. So this is a ridiculously strong base. With that in place, the arm does hold the monitor in the fully retracted position. Extended, there is way too much leverage and the arm starts to lean. So don't do that. It needs to stay totally retracted to the pole. To fit my monitor, I had to get VESA extension wings and those worked fine. This provides the solution I am going to use: angle irons bolted to the wings and running down to the table. I have room to do this. The angle irons will take up most of the weight and let the arm stay vertical and let me move it around. So it will be a three-legged mount instead of one. Eh. It will work fine for me until I come up with something better. Very tempted to drill holes in the clamp base and lag bolt that to the table. Nothing is going to beat that except welding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2022
G
Verified Purchase
gabe
San Leandro, US
★★★★★ 5
27" monitor mounted easily
Style: Single Arm, Size: 13"-34", Style: Single Arm, Size: 13"-34"
I ended up getting 2 of these monitor arms for the different desks in our office, and I am happy with both of them. The arms are super easy to assemble and adjust to the tension one desires. The arms hold the position where one sets them too, and the gas pistons make it super easy to use. Each arm has a channel on the bottom that allows the wiring to be ran through and hidden, yet remaining accessible if needed. The mounting clamps hold securely and there is no wiggle whatsoever, and it is nice to have a strong feeling monitor mount. It is lightweight and compact so it doesn't feel clunky on the desk. Highly adjustable left to right, up and down, and the screen forward and backward tilt. The price is really good for the overall value and quality of the product. Just make sure to order the right mounting arm depending on the size of your monitor, and you will be fine. Nice quality and feel, and the aesthetics are great too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
N
Verified Purchase
NYC Ninja
Bozeman, US
★★★★★ 5
Get this one!
Style: Dual Arms, Size: 13"-32", Style: Dual Arms, Size: 13"-32"
I got this dual monitor arm for my home office, and it’s been a total game changer. Having a dual monitor setup makes multitasking so much easier, especially for photo and video editing. Setup was incredibly quick (under 5 minutes), and it feels very secure once mounted. I really like how stable it is and how easy it is to adjust the height and angle. It also helped clear up a lot of desk space since I no longer need bulky monitor stands. Simple design, but it works perfectly. Highly recommend for both single and dual monitor setups. Great value for the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2026
J
Verified Purchase
James
Lowell, US
★★★★★ 5
Pretty great product
Style: Dual Arms, Size: 17"-33"
Stand works great and as expected. I have a 32” monitor on one and a 26” ultra wide in the vertical position on the other. I’ve had them for a few months and they’ve held tension perfectly. Usually, I find these spring tension arms to become loose after a few months and you just tighten them back up, these are still stiff like when I first set them up, and I move them around quite often. The monitors can rotate 360 degrees and tilt up and down almost 90 degrees each way. The clamp is sturdy so you will feel comfortable making sure it’s tight on the desk. I do plan on drilling a hole to mount the desk to mount it without a clamp and will update my review when I do so. It comes with the hardware to do either mounting options. They're made entirely of metal except for the plastic cable trays that clip along the bottom of the arms. The entire build is well worth the cost and gives me more space on my desk and helps my workflow when editing photos or editing video.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
Y
Verified Purchase
YAAU
Fort Morgan, US
★★★★★ 4
Pretty good product
Style: Single Arm, Size: 13"-34"
Assembly of the actual stand is easy, mounting to a monitor is not because of industrial design fluff. Gotta make the side you DON'T see look "sleek" and "smooth" and "organic" and "integrated" because...reasons. While this is on the manufacturer(s) of the monitor itself, what semi-modern monitor uses 100x100 VESA anyway? The included long screws are too long. Even using the plastic spacers they'll bottom out with a 2mm gap; add washers and it's a lever arm and not solid or confidence-inspiring. I used a die grinder to remove the excess material closer to 75x75 and used the included short screws, perfect. So either include 25mm screws instead of the 30mm (but then the spacers would be too long), or just update the mount plate to 75x75 only, and throw 100x100 "compatibility" into the dustbin of history where absolutely no one will miss it. Arm does move/adjust smoothly and is holding a 34" widescreen where I left it 2 days ago, so it IS a great product once it's properly fitted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026

recommand products